1. V-cut cutting machine For internal strength generates during separation, Minimize it to value under 180uE ,to avoid solder crack or component damage
2. Able to cut PCB edge of V-slot, minimum distance to component is 0.5mm,and max height of component is 60mm
3. Free sanding on Blade when it is worn.
4. V-cut cutting speed is one cut per second, controlled by pneumatic foot-plate switch
5. Blade activated negative, separation route and position in control safely
6. Pneumatically driven and electric control
7. PCB cutting is not realized by friction, so no obvious metal residue left,
8. V-cut cutting life is over 6000000 times
9. Air pressure 6 to 8 kg, no requirement on working environment, simple maintenance by anti-rust oil
Subject |
Parameters |
Model No
(V-cut cutting machine) |
ASC-620 |
Max Cutting Length |
330mm |
Cutting Thickness |
0.5 to 3.5 mm |
Working Pressure |
0.6 to 0.8 Mpa , dry air source |
Max Height of Component |
50mm |
Equipment Dimension |
700*550*460mm |
Working Voltage |
AC 220V 50~60HZ |
Gross weight |
120KG |